Electrical – General Requirements NFPA 70 E

Electrical Safety is governed by OSHA and can be found in the Code of Federal Regulations Under 29 CFR 1910.331-335. The National Safety Council estimates that there are at least 300 deaths annually from on-the-job electrocutions in the United States. Most of these are preventable.

Ladder Safety

Surprisingly, this course is as useful to workers safety at home as at work, however this course provides critical knowledge in ladder safety. Many different ladders provide for a students misunderstanding of the proper use of many ladders. This results in over 100,000 ladder injuries a year. This course covers simple physics and enables the

Read More

Scaffolding 29 CFR 1926.454 offers OSHA Scaffolding Competent Person safety training classes in the new scaffolding regulationwith an effective date of November 29, 1996. The OSHA regulation 29 CFR 1926.454 mandates that employers provide competent person safety training classes that offer certification. Employees involved in the erecting, disassembling, moving, operating, repairing, maintaining, or inspecting scaffolding who perform work

Read More

Lock-Out / Tag-Out 29 CFR 1910.147 offers safety training in OSHA 29 CFR 1910.147 The control of hazardous energy or calls lock-out, tag-out, try-out. This general industry course covers electrical, hydraulic, mechanical, pneumatic, and other forms of energy to include chemical, biological and radiological. Uncontrolled these energies may pose a dangerous condition which is prohibited in the work place by OSHA. Unexpected startups

Read More

8 Hour Hazwoper Refresher offers the 8 – Hour Hazardous Waste Operations and Emergency Response (HAZWOPER) training.  The Safety Training Class is designed to meet the initial training requirements detailed in General Industry 29 CFR 1910.120(e)(3) course for workers, supervisors and management who are on site only occasionally for a specific limited task (such as, but not limited

Read More

Fall Protection (1926.500-503) and 29 CFR 1910.269 offers safety training classes in OSHA’s requirements 29 CFR 1910 General Industry and 29 CFR 1926 General Construction for employers to provide fall protection systems. The employer shall determine if the walking/working surfaces on which its employees are to work have the strength and structural integrity to support employees safely. Employees shall be allowed

Read More

Respiratory Protection

Level D, Level C, Level B, Level A and special mentions of the history and development of masks. The respiratory selection matrix is covered here as well as the formula that is used to determine exposure control and proper mask selection the MUC= Pf x PEL.

Hazepower Training

HAZEPOWER TRAINING OSHA Hazwoper Certification (Hazardous Waste Operations) & Emergency Response Training HAZWOPER training aka Hazardous Waste Operations was promulgated into law back in the early 1980′s and was born of the 4 agency document designed by the collaborative efforts of OSHA, NIOSH, USCG and the EPA. There are five specific categories for those working

Read More

Translate »